Anycubic Standard Resin V2 1kg – HD Grey

Enhanced toughness and impact resistance | High-precision prints with minimal shrinkage | Low-viscosity formula for faster, cleaner results | Low-odour formulation | Compatible with all 405nm LCD/DLP printers

The Anycubic Standard Resin V2 in HD Grey is a reformulated photopolymer resin designed for makers, hobbyists, and professionals who demand both precision and durability from their LCD/DLP prints. Its enhanced toughness formula produces models that resist drops and impacts, flex without brittle fracture, and balance strength with ductility — making it well suited to action figures, consumer electronic shells, tooling fixtures, snap-on parts, and load-bearing structural components. A low-viscosity formulation promotes fast bubble dissipation and excellent resin flow, reproducing fine surface details and reducing overall print time. With a 4.3% volumetric shrinkage rate, the resin delivers superior dimensional accuracy and deformation resistance so your models come out true to design. The low-odour formulation keeps the printing environment comfortable, and broad compatibility with all 405nm UV-curing LCD/DLP printers means it slots into your existing workflow without fuss. Pre-configured profiles are available in Anycubic’s Photon Workshop slicer, so you can achieve consistent, high-quality results from the very first print.

Features

• Reformulated for enhanced toughness — models resist impact and flex without brittle fracture
• 4.3% volumetric shrinkage rate for superior dimensional accuracy and deformation resistance
• Low-viscosity formula with fast bubble dissipation for cleaner surface detail and reduced print time
• Low-odour formulation for a more comfortable printing environment
• Compatible with all 405nm UV-curing LCD/DLP 3D printers
• Pre-configured Photon Workshop slicer profiles for consistent print success
• Clean with ≥95% IPA; post-cure with 405nm UV at 25,000–30,000 µW/cm²

Specifications

• Colour: HD Grey
• Resin Size: 1kg
• Pre-print preparation: Shake well before use
• Print environment:20-40 ℃
• First layer exposure duration: 20-40 s
• Normal exposure duration: 2.5-3 s
• Print temperature: 20-50 ℃
• Material: Photopolymer Resin
• Wavelength: 365-405 nm
• Viscosity: 250-350/mPa·s(25℃)
• Density: 1.05-1.25/g/cm³
• Hardness: 80-83 HD
• Tensile Strength: 35-45 MPa
• Elongation at Break: 25-30%
• Bending Modulus: 40-50 MPa
• Bending Strength: 1500-2100 MPa
• Young’s Modulus: 1200-1400 MPa
• Izod Impact Strength: 192 J/m
• Volume Shrinkage Rate: 4.3-5.6%
• Cleaning: 95% IPA
• Washing duration: ≥3 mins
• UV Wavelength: 405 nm
• Curing Temperature: 18-30 ℃
• UV Intensity: 25000-30000 uW/cm²
• Curing time: 3 mins
• Disposal: Post-UV-curing resin is treated as plastic waste

What’s in the Box

• Anycubic Standard Resin V2 – HD Grey x1